刃刃刃時間時間 ~ ~ ~ ~ 方方

Both blade razors are the prototype -birth and history of safety razors

A double -edged razor, the prototype of the safety razor developed by King C. Gillet in 1903. It is no exaggeration to say that if you can enjoy the original pleasure of shaving, you can not speak without using this razor.

At that time, I put a blade on both sides of the replacement blade, which was only one -edged, so that the beard was turned off. This extends the life of the blade and maintains a clean and clean shaving feel longer than before. Also, when shaving the beard, you can easily shave just by putting the blade on your cheek without worrying about the angle of the blade.

At that time, the razor and the replacement blade were very expensive, and carbon steel was mainly used for the replacement blade. The current replacement blade is made of stainless steel, so it has become stronger for rust, but in the past, when the razor and the replacement blade were finished, the wiping blade was carefully rusted if it was not returned to the oil paper, so it was carefully stored. that's right.

In 1965, SCHICK released the Kannon Opening type (butterfly open) razor.
It's already a razor more than 50 years ago.。
It is made of resin and metal and has a moderate solid feeling, and the case is stored in the hard case.

A razor that was not cheap at that time. You can see that it was an indispensable tool for every day of an important man.

The charm of a double -edged razor

The double -edged razor is attractive with the vibration and sound transmitted to the hands directly in the hand, and the shaving comfort of the single -blade running smoothly on the skin.

In addition, the exhilaration that is shaved is also a popular point.

Compared to the latest razor with an increase in the number of blades, one blade hits the skin directly, so it is certain that it is easy to lose razor, and it is a traditional (one -time effort and time and effort ( There is also a classical (classical) side, so you need knowledge and skills on the use side.

Tips for using double -blade razors safely

1. Let's do the pre -sheve properly

Give your skin and mustache firmly moisture. Most of the causes of razor defeat are here!
The mustache has the same hardness as the copper wire, and in the back of the hair is a layer of air cells. By giving moisture, the layer of the air is moisted and it expands about 40 % and it is easy to be cut.

Hot water is the best way to penetrate quickly.
If you take the time to enjoy the ritual of shaving slowly, why not warm your entire face with a steamed towel inherited from the predecessor. It is also recommended to make a steamed towel at home.

【reference】Easy steamed towel at home
https://www.kamisoriclub.co.jp/pages/howtosteamedtowel

2. Father the shaving soap to the lubricating oil

In recent years, shaving foam and gel are generally cleaned before shaving. And, of course, you can use forms and gels, and in that case, it's important to make your skin blend well.

On the other hand, a barber shop still uses a shaving brush that is inherited by the predecessors. It's a pleasant blissful time for a brush that has been foamed after a steamed towel to draw a circle on the face.
Of course, it feels good, but the brush has a meaningful meaning.

▼ Characteristics of shaving brush (beard brush)

Brush hair and make fine foaming
The tip of the brush softens the skin and mustache on the surface while scraping dirt
Massage the surface of the skin at the brush tip

If you add the bubbles to the beard, shave. Foam is an important must -have item that reduces razor losing with a mustache and razor lubricant! Shaving requires a balance between foam and water, so be sure to apply it.

3. Adjust the angle to shave yourself

The trick of shaving is that it is gently shaved down with the weight of the razor instead of pressing the razor. Once you know the Atari, shave from the cheek to the bottom.

The first is "shaving". Shave from the cheeks, from the chin, from the chin below and below to the bottom. Please note that if you shave from the bottom to the top, it is easier to shave from the beginning, which is more likely to be one of the razors.

The beard has the same hardness as the copper wire. A long mustache has a considerable resistance to a thin razor blade, and it lifts the skin at the same time as it is shaved and shaves it at the same time. It also causes a razor.

If you want to shave deep, let's shave from here to the top. However, shave gently without applying power.

If you have weak skin, stop it with just a shave.

4. Rinse well

After shaving the beard, wash the soap and mustache firmly with hot water.

After shaving the mustache in the movie, wipe it off with a towel and finish! I see the sight, but it is not good for the skin.If you have trouble on your skin, it can also cause a razor. Let's keep in mind and clean.

5. Aftercare is solid

As you know, a razor is a so -called ritual with sharp knives on your face. It is important to do it at the end of the ritual.

Hitting a sharp knife on the skin may cause small scratches and blood that are inevitably visible. Let's do after -shave and prepare your skin condition.

For sensitive people, alcohol -free types such as milky lotion are recommended. In winter, we recommend a type that has a gel type and has a moisturizing effect.
When it is dried, moisturize and keep your skin moist.

Wet shaving is next to the razor every day.
This is an inseparable edge.

So, let's get along so that you can reduce the razor as much as possible with daily daily care.

What is the replacement time and care of the double -edged razor?

The replacement of the double -edged razor is honestly different from person to person. This is because the thickness of the mustache and the area that grow is different.
Do you want to wipe the water on the replacement blade with a towel after using a question from a customer? There was.

In today's era, the material of the replacement blade is not rusted as a type that is easy to rust like an old carbon steel, so it is hard to rust, so there is no problem without wiping it.
The longest secret is to give the beard with moisture and reduce the burden on the edge of the blade.

Chic reprinted a classical razor half a century ago in 2019

https://www.kamisoriclub.co.jp/products/1903schickdoubleedgerazorstand
→ See the product page

The 2019 renewal model is not used and all metal is all metal.
And it is a cool feature of Kannon (butterfly). Turn the lower part of the razor to open the upper part

The replacement blade is made at the Schick Zolingen factory
We recommend replacement in 12 to 14 days.

This is the razor club's own order in Italian workshops, and a reprint model of a classical razor manufactured in early 1900

You can experience the shaving of your predecessor a century ago! That's such a razor! [Name insert/gift] OLD FLORENCE OTTONE INVECCHIATO SAFETY double -edged razor

https://www.kamisoriclub.co.jp/products/ra351-safety

I think the double -edged razor is the highest time of wet shaving, which takes time and slowly performs. All actions can feel rich and rich in men's morning rituals.

Supervision